Impact/Pulse Eco Versions

1.14

(In progress)

• Server 4.1.84:
  • RDS Automation : add DoNotSendMeta() and bug fix for FTP access
  • Support handling of multiple IP and Ethernet interfaces
  • Correct a bug on Link&Share handling, which may crash the server
• Stream 2.4.19:
  • Added RTP/MPEG-TS protocol with possible FEC
  • Added UDP and UDP/MPEG-TS protocols
  • Added MPEG1-Layer2 codec
  • Supports ulpfec (RFC 5109) and parityfec (RFC 2733) for RTP streams
  • Can select Stereo/Joint-Stereo for MP3
  • Can choose RTP payload type for some codecs
  • Correct RTMP metadata handling bug
  • Can choose source IP when multiple are available
  • Correct possible dead-lock on bad configuration
• LANAudio 2.0.29:
  • Can specify PTP Announce/Request Interval and Timeout
  • Fix PTP timestamp race condition, which can lead to reboot when traffic is too heavy
• Support for extra IP address on Admin Ethernet port
• NTP client: force use of non-privileged source port to pass through some firewalls.
• Update Linux kernel security/fixes (5.10.21)

1.13

(2021-02-23)

Livewire GPIO: reversed hardware level logic from previous versions

• LANAudio 2.0.27: Revert the GPIO logic level for Livewire. For Axia, a Low level is active (and not high)
• SOUND4IP 2.2.4: Turn off Ethernet LED when no cable is plugged

1.12

(2021-02-16)

• Server 4.1.82:
  • RDS Automation : can send metadata from the script (useful for TCP server) with SendMetaNow
  • Corrected RDS metadata parser (last line was not properly handled without a carriage return)
  • Correction: errors on sockets may create a high CPU usage
  • Many little bug fixes
• Stream 2.4.17:
  • Can detect no audio, and stop streams in this case if configured for.
  • Metadata: can send metadata from the script (useful for TCP server) with SendMetaNow.
  • RTP linear PCM: send now constant size payload audio
  • Metadata improvements
• Watermarking 1.0.9
• Board 1.5.5: Allows DSP to work with a higher clock
• Process 2.1.15: Allows DSP to work with a higher clock
• System:
  • correct some more syslogd rotate principle to avoid loosing some archived messages
  • safely reinitialize front panel display if chip configuration lost (very uncommon problem)
  • Force frontpanel screensaver mode
  • Can put custom logo on front panel
  • Correctly restore Windows sharing after SDCard plug/unplug
  • Correct bash 4.4 patches for some bugs
  • Protect upgrades for incompatible hardware
• Update Linux kernel security/fixes (5.10.6)

1.11

(2020-06-29)

• Server 4.1.76:
  • Try to detect UTF-16/32 on file reading, and convert whenever it is possible (Metadata).
  • RDS Automation : correction so Line/Char parsing works properly with TCP server source
• Stream 2.4.13: Display stream version in software. Correct unicode detection for non-UTF8 sources.
• Watermarking 1.0.8: Display stream version in software
• FullRDS 1.2.13: Display stream version in software
• LANAudio 2.0.26: Correct AES67 Slave clock does not switch from a Master to another
• (Impact only) Process 2.1.14: Pure Force as default presets
• System: correct syslogd rotate principle to avoid loosing some archived messages
• SOUND4 Driver 2.18: recover Watermarking in case of missed interrupt due to hardware delay
• Update linux kernel security/fixes (4.9.228)

1.10

(2020-05-14)

• Server 4.1.73: correct Preset Sharing and Discovery (was not working since 1.03) and preset import/export with L&S commands
• Remote 4.1.57: theme fixes. Can change Preset Sharing password without knowing old one.
• new fanmanager to be less noisy

1.9

(2020-05-07)

• Stream 2.4.10: HeAAC v2 allow bitrate up to 64kbps
• limit samba (windows share) logs, which could grow huge if a lot of different client IP.

1.8

(2020-04-24)

• Support for new plugins, like supervision
• FullRDS 1.2.12: Correct bad serial port initialisation -> does not show baudrate
• Stream 2.4.9: Separate Icecast 2.0 and Icecast 2.x
• Emergency/URL player: always restart on errors

1.7

(2020-02-27)

• FullRDS 1.2.11: Correct bad memory delete in ODA Config and Short Message (was crashing)
• SOUND4IP 2.2.3 update: Complete default init.
• Server 4.1.71: better conversion for unicode string
• URL Player: add "useragent" information
• Upgrade: now URL player stop before upgrade and restarted after

1.6

(2020-02-27)

• Enable the Full Reboot of unit