Ethernet/IPConnect Versions

2.2

Support Authentication mode for single-side fixed IP (only 1 side needs a fixed IP)

2.2.6

(Preview - 2024-09-24)

• For Accept Auth mode, reply to the source MAC instead of using route.

2.2.5

(2021-08-06)

• Properly show error in link when other side fails to connect because it does not receive anything.

2.2.4

(2021-02-23)

• Turn off Ethernet LED when no cable is plugged

2.2.3

(2020-02-25)

• Label compatible with ECO
• Change check links in error without using huge memory

2.2.2

(2019-07-23)

• Correct GPIO spurious activity

2.2.1

(2018-12-19)

• Correct GPIO show/display. Enabled for 2nd Enc/Dec

2.2.0

(2018-11-15)

• Support Authentication mode for single-side fixed IP

2.1

Support for second IP configuration on the same Ethernet for dual network sharing same physical Ethernet.

2.1.5

(2018-11-15)

• Correct boot problem present since 2.1.2
• Correct possible conflict on flash with FPGA on bug.

2.1.4

(2018-10-01)

• Supports GPIO (Need driver Linux:2.12/Windows:*not avail*) Need Board 1.4.13+
• BUG: boot problem, DSP might not boot each time, so long reboots...

2.1.3

• Longer hostname

2.1.2

• Started on GPIO

2.1.1

• Better handling second IP/conflicts.
• More info on error/public IP.

2.1.0

• Better error logging.
• BUG ? Changing Main IP may break the 2nd IP, only if one same subnet. Need change 2nd IP and put back.

2.0

Compatible with new GUI (Need Server/Remote 4.0.0)

2.0.6

• Automatic NAT Traversal. No more Recover Mode.
• Should resolve all problem of failing reconnects.
• It is recommended to update both sides, but should be compatible.

2.0.5

• Added Secondary IP. Can be used for dual network.

2.0.4

• Removed all line TTL checks

2.0.3

• Do not change settings on licence lost
• Give license fail another chance

2.0.2

• Setup Recover mode.

2.0.1

• Corrected possible drops (specially with Linear Codec)

2.0.0

• Compatible with new GUI (Need Server/Remote 4.0.0)
• BUG: drops on Linear (since when ?)