Full RDS/UECP

The Full RDS service needs 2 things to work:

• a valid Full RDS license
• the Full RDS service running

The Full RDS License is displayed as "Option Full RDS/UECP" in the licenses list.

It is available on all FM processors (Impact, Pulse, First) in box or in card.

Note that Eco boxes do not have RS232 connector for UECP. You will have to use UDP, TCP or a USB-RS232 adapter.

Full RDS Service on boxes

The Full RDS Service must be enabled.

This can be done from Remote Control or from Web server.

From Web server

Login to the box as admin and go to Setup->Services Management->Services

Select On for SOUND4 Full RDS, and clic Ok.

The restart procedure may last more than 5 minutes.

From Remote Control

Login to the box as admin and go to Setup->Advanced->Services Management

Select Enabled for Enable Full RDS, and clic Apply.

The restart procedure may last more than 5 minutes.

Full RDS Service on cards

You have to install the Full RDS Extension on the PC where the card is.

For Windows, download Full RDS Extension from http://www.sound4.com/downloads/impact-card#downloads and install it.

For Ubuntu, sudo apt install sound4fullrds

Usage

When service is running and License is valid, in Setup->FULL RDS there are general configuration to define ports and addresses.

On the workspace, there is a Full RDS tab, where you can define all main parameters. Those can be set directly from UECP.

Ports

For boxes, the RS232 pinout is described in RS232

Additional RS232 ports may be added with USB adapter(s).

UDP/TCP ports use the Admin Ethernet port.